5 Best Chainsaws for Cutting Firewood, Hardwood and Wet Wood

a chainsaw for firewood cutting

Chainsaws are used for all sorts of purposes and are perhaps one of the most versatile tools on the market. From cutting firewood to clearing away logs, chainsaws are an understandably popular tool. Everyone needs a good chainsaw, especially if you plan on cutting firewood. Without one, you may likely end up cold this winter. Sadly, there really aren’t that many great chainsaws available on the market. While chainsaws for cutting firewood are quite popular, most of the ones available are mediocre at best.

No one wants to spend their money on a poorly designed saw. To help you make the best buying decision, we’ve put together this complete guide to buy the best chainsaw for cutting firewood. We’ve included everything from chainsaw reviews to a list of important features to consider. With us, you’ll know the truth behind each model before you buy it, allowing you to spend your hard-earned money wisely.

Comparison of our Top 5 Models

More Details
#1. Husqvarna 460 Rancher
Husqvarna 460 Rancher
Editor's Choice

Check Current Price

14.5 lbs


Jump to Review


Check Current Price

9 lbs


Jump to Review
#3. WORX WG304.1
WORX WG304.1
Value for Money

Check Current Price

11 lbs


Jump to Review


Check Current Price

10 lbs


Jump to Review
#5. Sun Joe SWJ698E

Sun Joe SWJ698E

Check Current Price

10 lbs


Jump to Review

5 Best Chainsaws for Cutting Firewood – Reviews 2023

#1 Husqvarna 460 Rancher Chainsaw – Best Overall

Husqvarna 460

When it comes to Husqvarna 460 Rancher it is the best chainsaw for cutting firewood, you can’t get much better than this. It is a well-known gas-powered chainsaw – and for good reason. We liked how easy it is to start/stop this chainsaw with a combined switch in just 1 or 2 pulls.

You won’t get much fatigue as due to having moderate weight of 14.5 Lbs it doesn’t vibrate too much hence easy to control and use. This chainsaw for firewood is able to cut 9 pin trees and 3 oaks in quick time. Despite this machine’s high power, it uses surprisingly little fuel.

Even though this gas chainsaw has 2 horsepower but feels far stronger than that due to the stellar design. It features an air injection system that prevents dirt and debris from entering the engine while in use. This increase the overall power and durability in the engine. When we did need to change the air filter, the quick-release feature made it extremely easy.

The trigger is not as sturdy or well-made as we would like. In fact, it is appears to be made of cheap plastic. While it didn’t break, there are a couple of reports of it failing. Some users reported that the bar and chain is also somewhat difficult to install, although it’s durable and powerful.

It is a professional grade gas chainsaw. This saw is not for the homeowner that only trims trees once a year. This is for the serious arborists. If you looking for a chainsaw for firewood with plenty of power and at a good price, we will recommend you buy this one.


  • Adjustable oil pump
  • Powerful & Low vibration
  • Quick Start
  • Comes with a detailed manual
  • Intertia activated chain brake for safety


  • Slightly Expensive

#2 DEWALT DCCS620B Firewood Cutting Chainsaw – Runner-Up


This is our 2nd pick in list of best chainsaws for cutting firewood. Dewalt is new in the chainsaw market, but it is hard to tell with this well-designed machine. It just weighs under 9 pounds and easy to handle for overhead work. The weight makes it incredibly easy to manoeuver it and resulting in less fatigue for us. This chainsaw makes it very easy to cut branches and chop up firewood. In fact, this saw is probably one of the easiest to manoeuver. If you want the lightest chainsaw for firewood you can get without sacrificing power, this is a great option.

As this is a battery-powered chainsaw so it produces is almost negligible noise as compared to gasoline chainsaw. You can communicate with another person nearby efficiently while using this saw.

The battery used in this chainsaw is compatible with other 20V DEWALT tools & lasts a long time. With a 5Ah battery, you can work for several hours, and still has some power left.

With the 12 inch Oregon Bar and chain on this chainsaw you cut a small tree of 10” diameter. While you probably aren’t going to be cutting down any huge monsters, this saw is more than enough for your average tree. Well, you can do a $35 upgrade for bar and chain which match the power of Husqvarna 460.

There were a couple of things we found this saw lacking in. The oil cap is also very difficult to remove. It is surprisingly flimsy but is also screwed on impossibly tight. This battery powered chainsaw comes with 90-day money back guarantee.


  • High-efficiency brushless motor
  • Tool-free bar tightening knob
  • Easy to use above ground
  • Battery lasts long & Quick Charge


  • Not as powerful as the Husqvarna Gas Saw
  • Consume chain oil fast

#3 WORX WG304.1 Firewood Chainsaw – Best For The Money

WORX WG304.1

WORX WG304.1 is a less expensive chainsaw for firewood and provides you full value for money. It can do nearly everything the more expensive chainsaws can, but only costs a fraction of the price. To be honest, we were rather skeptical when we opened up this chainsaw.

Despite its lower price, it is quite powerful. With the help of 15-amp motor which can produce up to 4 horsepower, the 18″ chain & bar on this chainsaw is able to cut 6 ft diameter oak tree with ease, fast, without any hassles. You don’t need to sharpen the chain till 3-4 jobs.

This electric chainsaw for firewood is particularly suitable for those who have very little experience with chainsaws or cutting firewood. It has a number of features that make using it a breeze. Firstly, replacing the chain requires absolutely no tools and is quite straightforward. After a quick glance at the user’s manual, we quickly figured out how to change the chain. The auto-tensioning feature is particularly helpful. It prevents the chain from over-tightening or becoming too loose. If you’ve never used a chainsaw before, this feature is seriously useful.

Another thing that we absolutely loved about this chainsaw is that it comes fully assembled. While assembly this chainsaw is quite easy, particularly useful for beginners, but this is not the case for all chainsaws. The fact that this saw required no assembly allowed us to jump into cutting faster.

We also liked that this chainsaw included all-metal dogs for added stability. This is a feature that we missed on even more expensive chainsaws, so we are very surprised to find it on this budget option under $200. The self-lubricating feature on this chainsaw is also helpful. It helps extend the life of your tool, even if by a small amount.

Another feature we fell in love that this chainsaw is electric. Of course, we were somewhat unsure at first. Electric chainsaws are underpowered when compared to gas chainsaws, so we weren’t exactly sure what to expect. Despite its power source though, this saw is quite powerful and lasts a decent amount of time in between charges. You do not have to worry about purchasing fuel for the saw or mixing oil and gas. Just plug it in and you’re good to go. This saw does require oil for lubrication. However, it has an oil level indicator that is very easy to read.

Of course, because this saw is electric, you must have to be near an electricity source to use it. If you mostly work out in the field for firewood cutting and away from an outlet, this chainsaw just isn’t going to work for you. We also didn’t like how much of this saw was made out of plastic. Even the drive gears are plastic and become stripped out easier than other models.

The oil reservoir is also not well made. Frankly put, it leaks oil out of the bottom when you aren’t using it. At first, we thought this was a malfunction. However, we were then informed by customer service that this glitch was expected and is not covered under warranty. In other words, the saw is designed to leak. They suggested that we drain the oil after each use.

For chopping firewood by your house, this saw will likely be good enough. However, for much more, you might want to consider a different saw.


  • Lightweight
  • Rubber rear handle
  • Ergonomic front handle
  • Built-in chain brake for added safety


  • Oil reservoir leaks by design
  • Auto tension feature malfunctions
  • Gears are plastic

#4 BLACK+DECKER LCS1240 40V Cordless Chainsaw


We really wanted to love this chainsaw. However, in the end, it was only so-so at best. It wasn’t all bad, of course. There were quite a few features we liked about it. The tool-less chain tensioning feature was quite helpful. The fewer tools we have to drag out to make a chainsaw work properly, the better. This feature also made on-the-spot adjustments quite easy. The noise is definitely less than what I have heard from gas chainsaws.

With a 40V battery, this chainsaw for firewood is much stronger & more powerful than other options. This battery-powered chainsaw cuts very quickly and gets the job done with ease. We think that 40V battery runs for a long time but it runs for an hour at the most with constant use. You can only make about 60 cuts in that time for small cutting jobs. However, if you’re felling trees or cutting tons of firewood, you must need an extra battery which means spending more money.

With the full wrap-around handle we were able to cut at various different angles comfortably. The handle is well built and designed. In fact, it was one of our favorite parts about this saw. For the price, you really can’t ask for more.

One of the most important features we liked is the automatic oiling system is better than some of the other saws we reviewed, including the WORX WG304.1. It keeps the chain & bar lubricated quite well.

We were annoyed with the saw sucking up oil quickly. We need to refill the oil well at least twice during a single use. In one charge, the saw ran through a quart of oil. We could literally see the oil running down the bar at one point. Still, it did do its job and we can’t ask for much more.

We really didn’t like when we need to adjust the tension and for that, we first rotated the bar adjusting knob. In order to do that, we have to loosen the locking knob which is really tiresome. Once we got it off the first time, it was easier to adjust after that.


  • 12” bar and chain
  • Battery and charger included
  • Automatic Oiling system


  • Extra batteries are expensive
  • Included battery is weaker than aftermarket varieties
  • Battery takes hours to charge
  • Leaks oil when stored

#5 Sun Joe SWJ698E Chainsaw

Sun Joe SWJ698E

We had our doubts about this saw from the minute we opened the box. The saw itself is a lot flimsier than we would have liked. It is not made out of very high-quality materials; that much was obvious from the moment we opened the box.

We did find a couple of things we liked about this machine. Firstly, the saw just weight over 7 pounds and is one of the lightest saws we used. Which makes it easy to maneuver and decreased our fatigue. As this is a battery-powered chainsaw which means you can take it at distant places to cut wood.

The 9 Amp motor provides a decent amount of power that should be able to cut most of your firewood. We did not attempt to cut down massive trees with this saw. However, for your firewood cutting needs, this saw should be powerful enough.

The automatic oiling system is worst than BLACK+DECKER LCS1240. The oiler basically continuously dumps tons of oil onto your 12″ bar and chain. The amount of oil it spews out is way more than the saw actually needs. We went through a quart of oil in ten minutes. Although you save money on this saw being the cheap option, you may lose more on the amount of oil you use. This is the main reason this saw ended up in fifth place.

Furthermore, thirty minutes into using the saw, the chain became extremely dull to the point that it wouldn’t cut anything. This is likely because the chain itself is very low quality. Then, the chain decided to slip off the bar and continued slipping off. Even after we had replaced the chain back into the right position, it would slip off within a few seconds of starting the saw.

Because we had not tested the saw enough to our liking, we tried to procure a replacement chain. However, this is a lot easier said than done. Replacement chains for this saw appear to be few and far between. The company doesn’t even have a clear replacement chain available. You definitely get what you pay for with this saw, which isn’t necessarily a good thing.


  • Built-in safety switch
  • 12″ bar and chain


  • Chain slips off bar
  • Chain included is very low quality
  • Gushes oil
  • Battery life is sub-par

How to Choose Chainsaw for Cutting Firewood – Buying Guide


Durability is important, especially if you’re going to be using your chainsaw for cutting firewood. Any saw you buy should be made out of high-quality materials and built to last. While plastic is not necessarily always a bad thing, it can make saws wear down faster and break easier. The inner workings of the saw should definitely not be made of plastic if you can avoid it. Plastic gears can wear down far faster than you might expect and can easily cause a chainsaw to become unusable. 

While it is possible to replace chains in some cases, no one wants to spend more money than they have to. A cheaply made chain can easily cut a job short after just a few uses. The battery should also be taken into account if you purchase an electric chainsaw. See if the battery lasts long and quickly charges or not.

Ease of Use

No matter whether you’re a veteran or a beginner, a chainsaw shouldn’t be more difficult to use than it needs to be. Preferably, the saw you purchase should have an automatic oiler and a tool-less tension adjuster. These features should work well and be truly easy to use. As we discovered while reviewing our chainsaws, not all tool-less tension adjusters are actually tool-less. The automatic oiler should also appropriately oil the chain and bar, as opposed to just gush oil.

While most chainsaws for cutting firewood do require some sort of assembly, the assembly should be easy and straightforward. A right chainsaw isn’t going to do you much good if you can’t put it together. We’ve encountered our fair share of confusing assembly directions and know the frustration they can cause. Poorly designed assembly instructions can also speak to the company’s customer service quality.

How it Handles

Any right chainsaw is going to be designed with the user in mind. You should not have to wrestle with a saw to get it to do what you want to cut. A poorly designed saw can easily stretch a quick job into hours.

When deciding what saw to purchase, choose one that has an ergonomic handle that will be comfortable to use. A well-designed handle will make the overall saw much easier to control. Typically, chainsaws come with one of two types of handles. Rear handles are the most common type and what we recommend for most homeowners. These handles are also good for cutting firewood.

Weight and How Heavy It Is

Weight can be an important factor while cutting firewood. The more features you shove onto a chainsaw, the heavier it is going to get. Batteries can also add a lot of weight to the saw. However, more weight typically means that you will fatigue faster. The more weight you have to manoeuver, the faster your arms are going to get tired. It is a balancing act of features and battery life versus weight.


Can you cut wet wood with a chainsaw?

If you live in rain affected area or where winter season is more than summer then you must have a question keep coming up “Can you cut wet wood with a chainsaw?” Power tools and water is not a good combination to use except tool like tile saw. That’s an exception. But still there are some power tools which can cut through wet materials with ease.

So the answer to your question is big yes. Yes you can cut wet wood using a chainsaw.

Does Cutting Wet Wood Dull a Chainsaw?

Cutting the wet wood with a chainsaw doesn’t make the chain dull. It is same like using it for any other type of wood. You chainsaw chain don’t get wet with water rather it gets wet from the lubrication oil.

If you are using chainsaw from long time you must know that we apply lubrication oil on to the chain to prevent it from overheating which actually helps the bar and chain to slide through the wood effortlessly without any frication.

You don’t need to worry about it as wet wood won’t degrade the efficiency of the chainsaw. There is no difference in cutting the wet or dry wood.

Best Chainsaw for Cutting Wet Wood

Selecting the best chainsaw depends on how much and what kind of wood you want to cut. A lightweight chainsaw like Husqvarna 120i is ideal for random pruning tasks and cutting small branches around your home. A cord free chainsaw is good for work around your home as petrol chainsaw has some negatives like more weight, noise and gas fumes. The ergonomic design and less vibrations of this chainsaw makes it easy to handle.

Wet wood is not easy to cut hence you need a more power saw like Husqvarna 440 E-series II to tackle larger jobs and cut large pieces of wood. Moreover, during the rainy or winter season, this saw is perfect for cutting firewood.

If you are professional arborist looking for a saw with power for regular use, then a robust saw such as 565 AutoTune is also good.

At the end, if you are need a chainsaw just to cut, shape, prune or lim removal, any lightweight tree care saw is sufficient.


Purchasing a chainsaw for cutting firewood is a big decision. Luckily, you don’t have to make a decision by yourself. Hopefully, our guide gave you all the information you need to make an informed buying decision.

For a great overall saw, Husqvarna 460 Rancher is the best chainsaw for cutting firewood. It doesn’t weigh much, uses little fuel, and is quite durable. It can be used for cutting firewood without a problem.

For a value for money option, the WORX WG304.1 Chainsaw is a suitable option. Despite its low price, it is quite powerful and required no assembly.

More Chainsaw posts:

About the Author David Vieria

David has been a woodworker for most of his life — in his dad’s cabinet shop. After using the tools himself, he decided to share it his woodworking and power tools knowledge with DIYers. Read more about him

follow me on: